세이프원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However If you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is significant, you may need to consider a security screen that also has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and wet floors. Windows that leak water do can not only cause destruction of your home's structure but also hinder your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any competent DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it blows open with an ease. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are happy to offer suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be misaligned due to wear, creating gaps between the frame and sash. These can be easily fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to get them realigned or replaced. In addition, the interlock could be disaligned. This happens on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

These seals can wear down or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.