세이프원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window Repairs (Historydb.Date) can help homeowners save money and make their homes warm. In the event of serious damages such as broken glass or a shattered frame, window replacement may be required.

However, many other issues can be addressed to extend the life of your windows. The most frequent issues are:

Cracked or Broken Panes

It's a rock that's been being tossed by your lawnmowers, or a tree branch that has been blown by strong winds, cracked window glass is not only visually unappealing, but also can result in higher electric bills since the broken pieces let cold air to enter your home. It's fairly simple to repair windows that have broken panes.

Start by carefully removing glass using gloves and sunglasses. You may have use a utility knife to break loose the old glazing compound or putty around the frame's edges. Next, use a soft cloth or paper towel to wipe the glass's surface and wood of the frame.

After the area is cleaned and dry, apply a waterproof silicone caulking to the frame's perimeter. This will stop water from getting into the frame through the crack and result in further damage.

A bad crack in double-paned glass may cause gas to leak between the panes, making your windows less insulative. If the crack is severe enough that it compromises the strength of the window or the pane inside is not there you might need to consult a professional.

Thermal stress cracks may also occur when there is a drastic difference in temperature inside and outside your home. The glass is then able to expand and contract. If this happens on two portions of a window it's recommended to replace the window instead of attempting to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready to be replaced. It will also keep out cold and bugs. You can even cut a piece of nylon stocking or tarp sufficient to cover the crack and fix it with duct tape. It's not a permanent fix, but it will keep insects and cold air away from your home. If your windows are old and you're beginning to see cracks in the glass, it's a good idea to check with your local window manufacturer about whether replacing the entire window could be a better option for you.

Rotten Wood

Wood rot is a common problem with windows. It can damage a home's appearance and create a safety danger. It is, however, possible to repair wood that has rot. First, you must address the cause of the wood's decay. Check for roof leaks and other areas where water could get into the wood.

You will then need to take off the rotten parts of the window frame. This can be accomplished with the claw hammer, chisel or a rasp. After the rotten areas have been eliminated it is time to replace them with new wood. Pre-treated wood is recommended for this task, since it will resist rot. If you cannot replace the timber that has rotted you can apply wood filler and hardener to repair the damaged area. Most hardware stores will have this type of product. Follow the instructions on the label of the product to get the most effective results.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant on the wood. A product such as Sikkens is an excellent option for this task.

Make use of a two-part epoxy to protect the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. However, it is important that you follow the directions for application on the label. After the epoxy filler dries, you can sand down the wood's surface. It is best to start with a rough layer of sandpaper, and then progress to a smoother grade.

The final thing you want to do is to make the area that has been damaged by exposed to more water. It is a good idea that's why you should cover the repaired surface with an oil-based primer that will protect it from water. Then, you can reapply the wood sealant that is waterproof.

The Won't open

A window that isn't opening could be due to many reasons. Wood frames can warp during rainy weather, or the house might have sunk or someone may have nailed it shut for security reasons. However, with a little patience and the right tools, many windows that are locked can be opened.

One of the most frequent causes of windows that isn't opening is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. Additionally, hardware made of metal can be rusty when it comes in contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and help keep your windows operating well.

The pulleys that raise or lower the window may become loose, or break. The components may lose tension and become obstructed when they are placed two or more floors above the surface.

If you are having trouble opening the window repair, try using a pry bar to gently force the window to open just a little at a time. Place a block of wood on the frame to give your pry bar more leverage. Also, be careful not to damage the window or wood. You can also try running a hair dryer around the edges of the frame for a few minutes to warm the wood and allow it to move more easily.

Another common problem with windows that won't open is a faulty spring that stops the window jamb from lowering or rising. You'll need to check the owner's manual for additional details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they won’t open, then it may be time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows slip from functional to useless since windows that aren't properly closed can make your home vulnerable to water damage and burglary. Contact us to learn more about our replacement windows and services today!