세이프원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers to help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues like sliding. A sagging uPVC window can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, tighten the screws until they stay in position.

If you cannot reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wearing out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corner joints of the sash should align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repair near me windows are difficult to open, or are loose and blow open with a breeze it could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. Changing a window hinge is essentially a very simple procedure, but it is easier to do if you have someone to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be unbalanced due to wear, creating gaps where the sash meets frame. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more economical to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.